Operating the lawnmower in the Manual mode
90
Operating the lawnmower in the Manual mode
*If your lawnmower model type is HRM1000, use Mii-monitor on smartphone/tablet. Refer to “5 Mii-monitor
Preparation” (M page 79).
Use the Manual mode when you want to ignore work timer settings.
As an example, you can move the lawnmower by yourself if there are two or more separated mowing areas
within the boundary wire, the mower cannot travel between the areas.
Set the following necessary settings such as [Mowing pattern] to operate in the Manual mode.
Selecting the mowing pattern
Home screen J [2.Garden setup] J [1.Mowing setup] J
[2.Mowing pattern] J [2.Manual mode] J Select the mowing
pattern from [Random], [Directional] or [Mixed].
For details, see “Mowing pattern”(M page 56).
Wire overlap
Home screen J [2.Garden setup] J [1.Mowing setup] J
[3.Advanced setting] J [1.Wire overlap].
For details, see “Wire overlap”(M page 57).
Edge cutting
Home screen J [2.Garden setup] J [1.Mowing setup] J
[3.Advanced setting] J [2.Edge cutting]
For details, see “Edge cutting”(M page 58).
Spiral cutting
Home screen J [2.Garden setup] J [1.Mowing setup] J
[3.Advanced setting] J [3.Spiral cutting]
For details, see “Spiral cutting”(M page 60).
Menu screen
Menu screen
Menu screen
Menu screen
To Next Page
Loading...
Need help?
General
