7.
Apply a thin coat of engine oil to the
rubber seal of a new oil filter.
8.
Install the new oil filter and tighten.
Torque: 19 lbf·ft (26 N·m, 2.7 kgf·m)
9.
Install a new sealing washer onto the
drain bolt. Tighten the drain bolt.
Torque: 22 lbf·ft (30 N·m, 3.1 kgf·m)
10.
Fill the crankcase with the recommended
oil (2 P. 67, 2 P. 152) and install the oil fill
cap/dipstick.
Required oil
When changing oil & engine oil
filter:
3.6 US qt (3.4 L)
When changing oil only:
3.4 US qt (3.2 L)
11.
Check the oil level. 2 P. 86
12.
Check that there are no oil leaks.
Engine Oil u Changing Engine Oil & Filter
Maintenance
89
Rubber seal
Oil filter
To Next Page
Loading...
