Honda NSS300 Owner's Manual

Coolant u Changing Coolant
72
Maintenance
3. Remove the reserve tank cap and add
fluid while monitoring the coolant level.
u Do not overfill above the UPPER level
mark.
u Make sure no foreign objects enter the
reserve tank opening.
4. Securely reinstall the cap.
5. Install the reserve tank lid.
6. Install the floor mat.
Changing Coolant
Have your dealer change the coolant unless
you have the proper tools and are
mechanically qualified.
3 WARNING
Removing the radiator cap while the
engine is hot can cause the coolant to
spray out, potentially scalding you.
Always let the engine and radiator
cool down before removing the
radiator cap.
Reserve tank cap
Reserve tank lid
Floor mat

Honda NSS300 Specifications

General

Displacement	279cc
Bore x Stroke	72mm x 68.5mm
Compression Ratio	10.5:1
Fuel System	PGM-FI electronic fuel injection
Transmission	Automatic V-Matic belt drive
Rear Brake	Single 240mm disc with single-piston caliper
Front Tire	120/70-14
Rear Tire	140/70-13
Ignition	Full transistorized ignition
Starter	Electric
Engine Type	Liquid-cooled single-cylinder four-stroke
Front Suspension	33mm hydraulic telescopic fork
Rear Suspension	Twin shock
Front Brake	Single 256mm disc with 3-piston caliper
Fuel Capacity	3.3 gallons