120
uuGauges and DisplaysuDriver Information Interface
Enables you to set the speedometer and the
displayed measurements to read in either mph
or km/h.
Press and hold the ENTER button. Each time
you do this, the unit will change from mph to
km/h or vice versa. After this, a confirmation
screen will appear for a few seconds.
Shows the current audio information.
2 Audio System Basic Operation P. 247
■
Units
■
Now Playing
*
* Not available on all models
21 PILOT-31TG76500.book 120 ページ 2020年3月18日 水曜日 午後4時38分