1Blind spot information System
*
Blind spot information system may be adversely
affected when:
•
Objects (guard rails, poles, trees, etc,.) are detected.
• An object that does not reflect radio waves well,
such as a motorcycle, is in the alert zone.
• Driving on a curved road.
• A vehicle is moving from a far lane to the adjacent
lane.
• The system picks up external electrical interference.
• The rear bumper or the sensors have been improperly
repaired or the rear bumper has been deformed.
• The orientation of the sensors has been changed.
• In bad weather (Heavy rain, snow, and fog).
For a proper blind spot information system operation:
• Always keep the rear bumper corner area clean.
• Do not cover the rear bumper corner area with
labels or stickers of any kind.
• Take your vehicle to a dealer if you need the rear
bumper corner area or the radar sensors to be repaired,
or the rear bumper corner area is strongly impacted.
To Next Page
Loading...
