Honda Remote Engine Start System II - Page 29

© 2012 American Honda Motor Co., Inc. - All Rights Reserved. 29
Setting the automatic defrost function
Automatic Defrost Function
1. Press and hold the engine/command button on the
transmitter, then holding the unlock/stop button.
2. In 5 seconds, a beep sounds and the A/C
cooperative operation in setup start indicator is
shown on the display.
3. After 5 seconds, a beep sounds and the current
status displays.
4. After 10 seconds, the screen will switch and short
beeps are sounded.
Indicates a current setting status
B127690H
Indicates that the setup is started
Blinking
B127060H
ENGINE/
COMMAND
BUTTON
UNLOCK/STOP
BUTTON
B127700H
Blinking
Indicates that the automatic
defrost function is deactivated
OFF
B127710H
Indicates that the automatic
defrost function is activated
ON
B127730H