Do you have a question about the Honda Sensing and is the answer not in the manual?
Collision Mitigation Braking System | Yes |
---|---|
Road Departure Mitigation System | Yes |
Adaptive Cruise Control | Yes |
Lane Keeping Assist System | Yes |
Traffic Sign Recognition | Yes |
Forward Collision Warning | Yes |
Lane Departure Warning | Yes |
Sensor Type | Camera and Radar |
Auto High-Beam Headlights | Yes |
Assists in avoiding or mitigating frontal collisions with vehicles or pedestrians by alerting and reducing speed.
Uses sonar sensors to detect potential collisions with obstacles and assists in reducing speed or avoiding them.
Maintains vehicle speed and following interval, automatically decelerating to a stop if the lead vehicle stops.
Provides steering input to keep the vehicle centered in its lane and alerts if drifting.
Alerts and assists when the system detects unintentional lane departure or leaving the roadway.
Displays detected road sign information, such as the current speed limit, on the driver interface.
Activates ACC standby mode or cancels the system; also cancels LKAS.
Activates LKAS standby mode or cancels the system.
RES/+ resumes ACC and increases speed; SET/- sets ACC and decreases speed.
Adjusts the following interval for ACC with Low Speed Follow.
Displays system status (standby, on, or problem) for ACC and LKAS via color codes.
Shows vehicle ahead detection, set speed, and set interval for ACC with Low Speed Follow.
Details the camera's location behind the rearview mirror and tips for optimal performance.
Covers avoiding windshield obstructions, damage, and proper recalibration after replacement.
Provides steps to resolve "Camera Temperature Too High" alerts using climate control and driving.
Instructs on resolving "Clean Front Windshield" alerts by cleaning the windshield and seeking dealer service if needed.
Identifies the radar sensor's location on the front bumper and its role in the system.
Advises on keeping the sensor clean, avoiding modifications, and potential issues after impacts or water submersion.
Specifies the location of sonar sensors in the front and rear bumpers and their detection range.
Warns against stickers, objects, or damage affecting sensors and lists conditions requiring dealer service.