Honda SUBWOOFER KIT - Page 6

6 of 11 AII 30529 (0509) © 2005 American Honda Motor Co., Inc. - All Rights Reserved.
23. Route the subwoofer harness toward the left, and
secure it to the vehicle harness using four wire
ties in the areas shown.
24. Route the subwoofer harness to the rear as shown,
and secure the subwoofer harness to the vehicle
harness using one wire tie in the area shown.
20. Continue routing the subwoofer harness to the
driver’s dashboard lower cover opening.
21. Secure the subwoofer harness to the vehicle
harness using one wire tie.
22. At the dashboard pocket opening, secure the
subwoofer harness to the vehicle harness using
three wire ties in the areas shown.
4628050
K
GLOVE BOX
OPENING
SUBWOOFER
HARNESS
VEHICLE
HARNESS
WIRE
TIE
SUBWOOFER
HARNESS
GLOVE BOX
OPENING
SUBWOOFER
HARNESS
WIRE TIE
DASHBOARD
POCKET OPENING
4628060
K
VEHICLE
HARNESS
25. Using isopropyl alcohol on a shop towel, clean the
areas where the cushion tapes will attach. Secure
the subwoofer harness to the vehicle panel and
the door sill using four cushion tapes in the areas
shown.
4413141
K
WIRE TIE
SUBWOOFER
HARNESS
DRIVER’S DASHBOARD
LOWER COVER OPENING
VEHICLE HARNESS
VEHICLE
HARNESS
4413151
K
CUSHION
TAPE
DOOR SILL
SUBWOOFER
HARNESS
DOOR
SILL
CUSHION
TAPE
SUBWOOFER
HARNESS
FUEL LID
OPENER
CABLE
CUSHION
TAPE
SUBWOOFER
HARNESS
HOOD
OPENER
FUEL LID
OPENER
VEHICLE
HARNESS
WIRE TIE
VEHICLE PANEL