Honda Wave 110i User Manual

75
Maintenance
Clutch
Checking the Clutch System
1. Loosen the lock nut.
2. Turn the clutch adjuster clockwise one
turn; do not turn excessively.
3. Slowly turn the adjuster counterclockwise
until a slight resistance is felt.
From this position, turn the adjuster
clockwise 1/8 turn, and tighten the lock
nut.
4. After adjustment, test ride the motorcycle
to be certain the clutch operates properly.
The engine should start easily with the
kicickstarter without the clutch slipping.
When shifting gears, the clutch operation
should be smooth and light, especially when
shifting into neutral.
Adjuster
Lock nut
12 AFS110-32KWWH00.book 75 ページ ２０１１年１０月２６日 水曜日 午後５時２２分
http://www.motorcycle.in.th

Honda Wave 110i Specifications

General

Displacement	109.5 cc
Bore x Stroke	50.0 mm x 55.6 mm
Compression Ratio	9.0:1
Fuel System	PGM-FI (Programmed Fuel Injection)
Transmission	4-speed
Starter	Electric and kick
Final Drive	Chain
Front Suspension	Telescopic fork
Rear Brake	Drum
Front Tire	70/90-17M/C 38P
Rear Tire	80/90-17M/C 50P
Ground Clearance	135 mm
Engine Type	4-stroke
Rear Suspension	Twin shock
Front Brake	Disc
Ignition System	Full Transistorized