Cold Engine:
a
Make sure the fuel valve is in the ON
position.
b
Turn the ignition switch to the ON position.
c
Shift the transmission to Neutral (
N
indicator to comes on).
d
Move the choke lever left all the way to fully
ON.
e
Using the start button
With the throttle slightly open, press the
start button.
Using the kickstarter
Lightly depress the kickstarter until
resistance is felt. Then let the kickstarter
return to the top of its stroke.
With the throttle slightly open, operate
the kickstarter. Kick from the top of the
stroke through to the bottom with a
rapid, continuous motion.
f
Warm up the engine by opening and
closing the throttle slightly.
g
Continue warming up the engine until it runs
smoothly and responds to the throttle, when
the choke lever is at fully OFF.
20181207113539_32KVMC000_eng_BOOK Page 26 Friday, December 07 2018 11:40:26 JST
Operation Guide
23
Continued
To Next Page
Loading...
