Warm Engine:
a
Do not use the choke.
b
Start the engine following steps 1-3 and 5
under “Cold Engine.”
If the engine does not start:
a
Turn the ignition switch to the OFF position.
b
Move the choke lever right all the way to
fully OFF.
c
Open the throttle fully.
d
Crank the engine several times with the
kickstarter.
e
Follow steps 1-2 under “Warm Engine.”
#
If Engine Will Not Start
(P.
76)
20181207113539_32KVMC000_eng_BOOK Page 27 Friday, December 07 2018 11:40:26 JST
Operation Guide
24
Starting the Engine (Continued)
To Next Page
Loading...
