#
Rear Turn Signal
1.
Remove the brakelight/taillight lens by
removing the screws.
2.
Pull out the bulb without turning it.
3.
Install a new bulb and the parts in the
reverse order of removal.
u After putting back the lens packing in
place, install the brakelight/taillight
lens.
u Use only the amber bulb.
20181207113539_32KVMC000_eng_BOOK Page 89 Friday, December 07 2018 11:40:26 JST
Electrical Trouble u Burned-out Light Bulb
Troubleshooting
86
ScrewsBulb
Brakelight/taillight lensLens packing
Lens packing
To Next Page
Loading...
