Honeywell Home TH4210U2002 User Guide

Package Includes:
• T4 Pro Thermostat
• UWP™ Mounting System
• Decorative Cover Plate
• Screws and Anchors
• 2 AA Batteries
• Thermostat Literature
M37844
T4 Pro
Programmable Thermostat
TH4110U2005, TH4210U2002
User Guide
For assistance with this product, please visit Honeywellhome.com/support
Customer assistance
Thermostat controls
• System status
information
Cool On/Heat On/Em
Heat On, Recovery,
Compressor Protection
• Actual time
• Schedule information
Following time based
schedule
• Mode
Select system mode
Heat/Off/Cool/Auto/
EM Heat (emergency
heat)
• Menu
Press to display options.
Start here to set a
program schedule
• Indoor temperature
setpoint
Press + or – to change
temperature setting
• Actual indoor
temperature
• Temperature/
Navigation buttons
Press to increase or
decrease temperature
setpoint and to
navigate menus and
menu options
• Fan
Select Fan mode
Auto/On
The screen will wake up by pressing any of the five buttons. If powered by the C wire, the screen stays lit for 45 seconds
after you complete changes. If powered by battery only, the screen stays lit for 8 seconds. Depending on how your
thermostat was installed, the screen light may always be on.
Read before installing

Honeywell Home TH4210U2002 Specifications

General

Type	Programmable Thermostat
Display	Digital
Backlight	Yes
Temperature Range	40°F to 90°F
Power Source	24VAC
Schedule	7-day programmable
Stages	1 Heat / 1 Cool
Terminal Designations	R, W, Y, G
Changeover	Manual
Voltage	24VAC