To Next PageTo Next Page
Need help?Do you have a question about the Honeywell Home THX9321 Prestige 2.0 and is the answer not in the manual?
General| Brand | Honeywell Home |
|---|---|
| Model | THX9321 Prestige 2.0 |
| Category | Thermostat |
| Language | English |
Describes the system's use and capabilities for residential and commercial applications.
Lists key features of the thermostat system, including RedLINK compatibility and customizable reminders.
Details the electrical ratings for the Equipment Interface Module and the THX9321 Prestige 2.0 Thermostat.
Describes how the thermostat and Equipment Interface Module are mounted.
Explains the thermostat's control logic for managing heating/cooling stages based on temperature.
Explains how to locate the thermostat's password for accessing installer options.
Provides important guidelines for the proper installation of RedLINK accessories.
Describes the installation process when using an Equipment Interface Module.
Instructions for installing batteries in the Outdoor Air Sensor.
Instructions for installing batteries in the Portable Comfort Control.
Instructions for installing batteries in the Indoor Air Sensor.
Instructions for connecting the RedLINK Internet Gateway.
Details the process of linking the thermostat to the EIM.
Provides steps for modifying system options after the initial installation.
Explains how to access the installer test menu.
Guides users through testing heating, cooling, fan, and IAQ equipment.
Guides users through testing the wireless signal strength.
Provides a quick overview of the residential display interface.
Details how to adjust dehumidification settings for residential use.
Explains how Delta T Diagnostics monitors system performance and detects failures.
Sets the temperature differential for turning on heating stages.
Explains how outdoor temperature affects heat pump operation.
Describes how the thermostat controls indoor humidity levels.
Explains how the cooling system is used for dehumidification.
Explains how the cooling system is used for dehumidification.
Sets the method for controlling ventilation: ASHRAE or Percent On Time.
Determines whether the thermostat or equipment controls the ventilation fan.
Sets the priority between lockouts and ASHRAE ventilation standards.
Defines conditions under which ventilation will not operate.
Describes the function and control of the economizer module.
Explains the Time of Day output for controlling lighting or other devices.
Provides instructions for replacing batteries in the wireless indoor sensor.
Provides instructions for replacing batteries in the wireless outdoor sensor.
Provides instructions for replacing batteries in the Portable Comfort Control.
Describes the function and use of the portable comfort control.
Describes the function and use of the wireless outdoor sensor.
Describes the function and use of the wireless indoor sensor.
Describes remote access capabilities via the internet gateway.
Describes the function of the wireless entry/exit remote.
Describes the function of the wireless vent and filter boost remote.
Explains how the thermostat uses sensors for temperature control.
Describes backup control when the thermostat is part of the temperature average.
Illustrates wiring for a 3-heat/2-cool heat pump with one transformer.
Illustrates wiring for a 2-heat/2-cool conventional system with one transformer.
Illustrates wiring for a 3-heat/2-cool heat pump with two transformers.
Illustrates wiring for geothermal radiant heat systems.
Illustrates wiring for a W7220 Economizer Module with heat pump systems.
Illustrates wiring for a W7220 Economizer Module with conventional systems.
Shows wiring for Prestige IAQ thermostats with an HZ432 zone panel without IAQ.
Details the setup for humidification control with zoning.
Details the setup for ventilation control with zoning.
