Honeywell 1900GSR-2 User Manual

6 - 11
For example, you may have set your device to the data format you saved as
Data Format 3. You can switch to Data Format 1 for a single trigger pull by
scanning the Single Scan-Data Format 1 bar code below. The next bar
code that is scanned uses Data Format 1, then reverts back to Data Format
3.
Single Scan-Data Format 1
Single Scan-Data Format 2
Single Scan-Data Format 3
Single Scan-Primary
Data Format

Honeywell 1900GSR-2 Specifications

General

Brand	Honeywell
Model	1900GSR-2
Category	Barcode Reader
Language	English