11 - 13
Scanner-Bioptic
ACK/NAK Mode
*Bioptic ACK/NAK
Off
232NAK0 2-27
Bioptic ACK/NAK
On
232NAK1 2-27
Scanner-Bioptic
ACK/NAK Timeout
ACK/NAK Timeout
*5100
232DLK##### 2-27
Cordless System Operation
Note: This section applies only to cordless systems. It does not apply to
corded scanners.
Base Power
Communication
Indicator
*On BASRED1 3-8
Off BASRED0 3-8
Reset Scanner Reset Scanner RESET_ 3-8
Scanning while in
Base Cradle
Scanning in Cradle
Off
BT_SIC0 3-8
*Scanning in Cradle
On
BT_SIC1 3-8
Paging Mode *On BEPPGE1 3-9
Off BEPPGE0 3-9
Paging Pitch Range 400 - 9000
Hz (*1000)
BEPPFQ#### 3-9
Beeper Pitch - Base
Error
*Razz (250) (min
200Hz)
BASFQ2250 3-10
Medium (3250) BASFQ23250 3-10
High (4200) (max
9000Hz)
BASFQ24200 3-10
Number of Beeps -
Base Error
*1 BASERR3 3-10
Range 1 - 9 BASERR# 3-10
Scanner Report Scanner Report RPTSCN 3-10
Scanner Address Scanner Address BT_LDA 3-11
Base Address Base Address BASLDA 3-11
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric
entry
Page
To Next Page
Loading...
Need help?
General
