Honeywell 2MLL-PMEA - Page 116

Chapter 9 P2P
10 Pnet I/F Module 2MLL-PSRA, 2MLL-PMEA, 2MLL-PMEB User’s Guide R220
Honeywell January 2019
[Figure 9.5.2] System diagnosis
Diagnosis
Description
Communication
module information
Shows standard information of communication module
Status by service
Shows P2P and High-speed link flag information
Auto-scan
Shows the master and slaves that connected with Pnet network
[Table 9.5.2] System diagnosis list
(b) Right clink on the Pnet I/F module and select [Status by service], then P2P service
information will be open as [Figure 9.5.3]
[Figure 9.5.3] P2P service monitor