Need help?Do you have a question about the Honeywell 2MLL-PMEC and is the answer not in the manual?
General| Supply Voltage | 24 VDC |
|---|---|
| Input Voltage | 24 VDC |
| Operating Temperature | -40 to +70 °C |
| Current Rating | 2 A |
| Housing Material | Plastic |
| Protection Class | IP20 |
Overview of the Profibus-DP Master I/F module within the ML200 PLC system.
Key features and standards conformance of the ML200 Pnet I/F module.
Information on module models, DP versions, and compatible CPUs.
Description of software tools for programming and configuration.
Environmental and physical specifications for ML200 series modules.
Technical performance details including speed, distance, and capacity.
Physical layout, LED indicators, and descriptions for modules.
Details on Profibus cable types and their corresponding communication distances.
Essential safety and preparation guidelines prior to module installation.
Step-by-step guide for configuring and operating the system.
Procedures and best practices for installing Pnet communication cables.
Guidelines for verifying system configuration and operational status.
Diagrams and explanations illustrating typical network system setups.
Overview of High-speed link and P2P communication functions.
Detailed instructions for using SoftMaster for configuration tasks.
Main functions and characteristics of the SyCon configuration tool.
System requirements and step-by-step software installation for SyCon.
Guide to configuring network parameters and settings within SyCon.
Procedures for downloading configurations and diagnosing network status.
Key functions and characteristics of the N Configurator tool.
System requirements and software installation process for N Configurator.
Details on screen composition and menu structure within N Configurator.
Steps for configuring master and slave devices in the network.
Procedures for downloading and uploading network configuration settings.
Network diagnosis and monitoring capabilities within N Configurator.
Overview of the High-speed Link communication service.
Illustrative example of the High-speed Link data send/receive process.
Step-by-step procedure for setting up and enabling High-speed Link.
Detailed instructions for configuring High-speed Link parameters in SoftMaster.
Methods for monitoring and interpreting High-speed Link status and information.
Overview of P2P communication features and capabilities.
Illustrative example of the P2P data read/write process.
Step-by-step procedure for setting up and enabling P2P communication.
Detailed instructions for configuring P2P parameters in SoftMaster.
Methods for monitoring and interpreting P2P service status and information.
Detailed programming example using SyCon for PMEA module communication.
Detailed programming example using N Configurator for PMEC module communication.
Programming example for 2MLL-PMEB using High-speed Link.
Programming example for 2MLL-PMEB using P2P communication.
Troubleshooting issues based on module LED status indicators.
Using SoftMaster's system diagnosis features for troubleshooting.
Diagnosing communication module issues using PLC history in SoftMaster.
Flowcharts to diagnose and resolve common connection problems.
Requirements and specifications for complying with EMC directives.
Safety precautions and requirements for low voltage applications.
Glossary of terms and acronyms used throughout the manual.
Detailed list and descriptions of High-speed link and P2P flags.
Physical dimensions of the 2MLL-PMEA/B/C modules.
To Next Page