Chapter 4 System Configuration
1 Pnet I/F Module 2MLL-PSRA, 2MLL-PMEA, 2MLL-PMEB User’s Guide R240
Honeywell January 2019
Chapter 4 System Configuration
4.1 System Configuration of Network
4.1.1 ML200 Pnet module and Smart I/O
Communication system of Pnet I/F modules is as shown below.
Set the Pnet I/F module as master in system and the others have to set as slave module.
To connect LS inverter, Pnet I/F option module have to install applicable product then it will be communicate.
[Figure 4.1] ML200 Pnet + Smart I/O diagram
To Next Page
Loading...
