Chapter 4 System Configuration
2 Pnet I/F Module 2MLL-PSRA, 2MLL-PMEA, 2MLL-PMEB User’s Guide R240
Honeywell January 2019
4.1.2 ML200 Pnet + Composite System
If it is used with another company product, GSD file provided by the maker is needed. After GSD file is copied
to GSD folder of Pnet configuration software tool(SYCON, N Configurator) and then if you use Pnet
configuration software tool(SYCON, N Configurator), you can configure the slave modules in the network
automatically.
[Figure 4.1.2] ML200 Pnet + Composite system Diagram
To Next Page
Loading...
