To Next PageTo Next Page
Need help?Do you have a question about the Honeywell krom schroeder IFD 258-5/1W and is the answer not in the manual?
General| Brand | Honeywell |
|---|---|
| Model | IFD 258-5/1W |
| Frequency | 50/60 Hz |
| Field of View | Not applicable |
| Category | Control Unit |
| Detection Principle | Flame detection |
| Output Signal | Relay output |
| Contact Rating | 5 A at 250 V AC |
| Operating Temperature Range | -20 °C to +60 °C |
| Weight | 0.3 kg |
| Certifications | CE |
| Power Consumption | 5 VA |
| Response Time | 1 second |
Illustrates wiring diagrams for IFD 258 and IFD 258..I units.
Details the step-by-step operational sequence during start-up and operation.
Explains how to interpret program status codes and fault messages.
Details parameters related to flame detection and control.
Describes the unit's operational behavior during the burner start-up phase.
Details the unit's operational behavior during normal burner operation.
Presents a table for selecting unit variants based on type codes.
Details how to implement emergency stop for fire or electric shock risks.
Describes emergency stop activation via safety interlock signals.
Explains restart or fault lock-out procedures after flame failure.
Provides instructions for correct wiring of the burner control unit.
Describes flame detection methods using ionization or UV sensors.
Details the behavior of the IFD unit after voltage removal and reconnection.
Provides guidelines and details for installing the burner control unit.
Explains the procedure for fault lock-out and resetting.
