Honeywell krom schroder BCU 440 - User Manual

6 Edition 01.17
AGA
Technical Information · GB
• Automatic burner control unit, ignition transformer, indicators and
operating controls in a space-saving metal housing which
replaces the local burner control cabinet
• For directly ignited burners of up to 350 kW in continuous
operation pursuant to EN 7462
• Display of the program status, unit parameters and flame signal;
Manual mode for burner adjustment and for diagnostic purposes
• Visualisation and adaptation to the specific application via the PC
programming and diagnostic software BCSoft to simplify logistics
management.
Burner control unit BCU 440

Honeywell krom schroder BCU 440 Specifications

General

Supply Frequency	50/60 Hz
Power Consumption	Approx. 10 VA
Operating Temperature	-20 to +60 °C
Storage Temperature	-20 to +70 °C
Flame Detector	Ionization or UV
Operating Mode	Intermittent
Type of Gas	Natural gas, LPG
Relative Humidity	Max. 95%, non-condensing