Honeywell krom schroeder IFD 258-5/1W - Reading off the Flame Signal

IFD 258 · Edition 03.12l
17
44 ซ.บรมราชชนนี 70 ถ.บรมราชชนนี ศาลาธรรมสพน์ ทวีวัฒนา กทม. 10170.
website: https://www.add-furnace.com/ โทร: 02-888-3472
Line ID: @add11 e-mail: add028883472@gmail.com
3 . 4 . 1 R e a di n g o ff t h e fla m e s i g n a l
Internally:
The flame signal can be called up on the display by
pressing the Reset/Information button (for 2 seconds).
The flame signal of the burner is indicated in µ A. A value
between 0 and 25 µ A is displayed.
Important!
When using an external µ -ammeter, you must make
sure that this µ -ammeter cannot simulate any flame
signal.