Chapter 6 SyCon Setting
18 Pnet I/F Module 2MLL-PSRA, 2MLL-PMEA, 2MLL-PMEB User’s Guide R240
Honeywell January 2019
6.4.1 Introduction
It can download the system configured through SyCon and diagnose the network status.
6.4.2 Online to the CIF
1) Configuration downloads
If Network is configured in SyCon, Configuration file is downloaded in Pnet I/F module.
“Online” “Download” is set and then massage window is opened as shown below. In
download, the communication between Master and Slave is stop.
6.4.3 Automatic network scan
This function detects the connected slave module network and read the configuration automatically.
1) New Project: File New
2) Master setting: Insert Master
3) Baud rate setting: Settings Bus parameter
4) Download the setting value in Master: Online Download
5) Saving: File Save
6) Network scan: Online Automatic Network Scan
To Next Page
Loading...
