Honeywell 2MLL-PMEC - Page 62

Chapter 6 SyCon Setting
17 Pnet I/F Module 2MLL-PSRA, 2MLL-PMEA, 2MLL-PMEB User’s Guide R240
Honeywell January 2019
4) Slave Configuration
- It can be display of configuration of slave and editing address.
Item
Description
General
Device
Slave module name
Station address
Slave station number
Description
Slave description
Activate device in actual
configuration
Activate device in actual configuration
Enable watchdog control
Enable watchdog control
(Default : 200ms)
Assigned master
Master1
Display master assigned
Actual slave
Slave2
Slave operation display
6.3.6 Bus parameter
“Settings”  “Bus Parameter”, it can be set the communication speed.
Baud rate is selected correspond to system operation.