Honeywell 2MLL-PMEB - Page 117

Chapter 9 P2P
11 Pnet I/F Module 2MLL-PSRA, 2MLL-PMEA, 2MLL-PMEB User’s Guide R220
Honeywell January 2019
P2P diagnosis
Item
Description
Standard
information
Base No.
Displays the base no. (0~7)
Slot No.
Displays the slot no. (0~11)
Service information
Parameter existence
Exist: 1
Not exist: 0
Parameter task status
Operation status of set P2P parameter
No. of blocks in service
No. of P2P block in operation
Communication
Diagnostics
Block number
Displays the P2P block in service
Channel number
Displays the P2P channel in operation
Status
Displays the status of P2P block
Service count
Service count of P2P block
Error count
Error count of P2P block in communication
[Table 9.5.3] P2P description details
1) Diagnostic communicates by REQUEST/RESPONSE structure with connected slaves. If there is not connected
slave, local indicates the information that slave is not connected. Also it is not related with error count
Remark