Chapter 10 Program Example
23 Pnet I/F Module 2MLL-PSRA, 2MLL-PMEA, 2MLL-PMEB User’s Guide R220
Honeywell January 2019
[Figure 10.2.17] Screen that has been set through Automatic Network Scan
To change Slave Properties, click a module from the topology and change them through the Slave
Properties Window on the left bottom.
10.2.2 SoftMaster settings
This part describes how to assign the internal memory by SoftMaster..
Click ‘Project’ ->’New Project’ and select project name and PLC series in the New Project window.
[Figure109.2.18] New project
To Next Page
Loading...
