Chapter 10 Program Example
30 Pnet I/F Module 2MLL-PSRA, 2MLL-PMEA, 2MLL-PMEB User’s Guide R220
Honeywell January 2019
Now the user should compose slave module. It can be either to set it up manually, or search
slave module existing in current network automatically and set it up.
However, at this time, the GSD file of slave module to be composed should be in the GSD
directory of N Configurator installation directory. The GSD file is provided by the company
manufacturing such slave module.
(1) How to set manually
As in setting the Master module, drag a selected slave from the device list on the left and drop it on
the topology as seen in [Figure 10.3.4].
[Figure 10.3.4] Add Slave Module (Manual Setting)
Change the station number of the slave module in the Slave Properties window on the left bottom as
seen in [Figure 10.3.5]. To activate this window, select a Slave from the topology.
To Next Page
Loading...
