Honeywell 2MLL-PMEB - Page 166

Chapter 11 Troubleshooting
4 Pnet I/F Module 2MLL-PSRA, 2MLL-PMEA, 2MLL-PMEB User’s Guide R220
Honeywell January 2019
11.2.3 High-speed link
[Figure 11.2.3] High-speed Link
High-speed link diagnosis
Classification
description
Standard
information
Base number
Base number module is installed on : 0~7
Slot number
Slot number module is installed on : 0~11
Network speed
Specified network communication speed
Master
Specified master station number displayed
Total
HS link
information
Run link
Normal: communication is normal with all stations
Error: if only 1 station is abnormal, communication
is not permitted.
Link trouble
Display of communication line status
Individual
HS link
information
Index
Index of High-speed link parameters
(It is a block number in SoftMaster)
Master station number
Master station number
Station number
Slave station number
Transmission
Size of Send data
Reception
Size of Receive data
Mode
Present operation status
Transmission/Reception
status
Send/Receive status displayed
High-speed link status
High-speed link status displayed
Error
Error status displayed
[Table 11.2.2] High-speed link diagnosis