Chapter 5 Communication Program
8 Pnet I/F Module 2MLL-PSRA, 2MLL-PMEA, 2MLL-PMEB User’s Guide R240
Honeywell January 2019
5.2.3 Uploading High Speed Link parameter and setup
(1) Screen of communication module specified
[Figure 5.2.9] Communication Module Settings
(2) Uploading a configuration tool (SyCon or N-Configurator)
With the mouse cursor positioned on “High-speed link1”, select [Online]-[Communication module
setting]-[Config. Upload (Dnet, Pnet)]
[Figure 5.2.10] Config data Upload from SyCon or N-Congurator
To Next Page
Loading...
