Honeywell 2MLL-PMEB - Page 59

Chapter 6 SyCon Setting
14 Pnet I/F Module 2MLL-PSRA, 2MLL-PMEA, 2MLL-PMEB User’s Guide R240
Honeywell January 2019
Item
Description
General
Description
Explain of Master
Station address
Setting of Master station number
Device
Display of Master board
DP Support
DP Master Settings
Setting of DP Master
FMS Support
It is set when the device supports the FMS
5) DP Master settings
a) Set the “Controlled release of the communication by the application program” in “Parameter to user
interface”
b) Set “1000ms” in “User program monitoring”
c) “Parameter to process data interface”
(a) Set “Byte addresses” in “Addressing mode”
(b) Set “Little Endian” in “Storage format(word module)”
d) Set “Buffered, host controlled” in “Handshake of the process data”