Honeywell 2MLL-PMEB - Page 96

Chapter 8 High-speed Link
5 Pnet I/F Module 2MLL-PSRA, 2MLL-PMEA, 2MLL-PMEB User’s Guide R220
Honeywell January 2019
2) Setting of SoftMaster connection
It designates the way of SoftMaster connection with CPU. “Online”  “Connection Settings”
[Figure 8.4.2] Connection settings
Items
Description
Connection
option
settings
Connection type
RS-232C, USB
Connection depth
Local/Remote connection setting
Local: Connection of from PC to CPU directly
Remote: Connection from PC to CPU via
communication module
Common
Timeout interval when
communication failure
1~9 seconds
Retrial times when
communication failure
1~9 times
[Table 8.2] Setting of connection option
3) SoftMaster connection
SoftMaster is connected to CPU by “Online”  “Connect”.
4) Read I/O information
Select “Online”  “Diagnosis”  “I/O Information” and click “I/O Sync” to read modules
installed on the base. Surely execute “I/O Sync” for High-speed link setting.