Honeywell 2MLL-PMEC - Page 105

Chapter 8 High-speed Link
14 Pnet I/F Module 2MLL-PSRA, 2MLL-PMEA, 2MLL-PMEB User’s Guide R220
Honeywell January 2019
(3) High Speed Link : “System Diagnosis.”  Click the right mouse button with the cursor positioned
on the applicable module  HS Link
[Figure 8.5.4] High Speed Link
Item
Details
Standard
information
Index
Displays the High-speed link block number
Base no.
Displays the base no.( 0~7)
Slot no.
Displays the slot no.( 0~11)
Network speed
Displays the communication speed by bps unit
(9,600 bps ~ 12Mbps)
Master
Displays the master station no.( 0~126)
Total HS link
information
Run Link
Displays the flag of Run Link
Link trouble
Displays the flag of Link Trouble
Individual HS link
information
Master station no.
Displays the master station no.( 0~126)
Station number
Displays the slave station no.( 0~126)
Module type
Displays the Transmission or Reception type
Transmission
Master module  Slave module
Transmission
Consistency Over
Displays the size of Transmission byte
Reception
Slave module  Master module
Reception
Consistency Over
Displays the size of Reception byte
Total size
Displays the size of Transmission/Reception byte
Mode
Displays the mode of CPU
Transmission/Reception
status
Displays the information of Transmission/Reception
between master and slave
High-speed link status
Displays the information of high speed link between
master and slave
Error
Displays the error information between master and slave
[Table 8.5.4] High Speed Link