Honeywell 2MLL-PMEC - Page 135

Chapter 10 Program Example
18 Pnet I/F Module 2MLL-PSRA, 2MLL-PMEA, 2MLL-PMEB User’s Guide R220
Honeywell January 2019
Set remaining MPL-D22A through the process described above.
However, for MPL-BSSA as extended slaves, it is necessary to add module data. Set MPL-BSSA on
the topology first through the process above as in the following figure
[Figure 10.2.8] Add Extended MPL-BSSA
Press module data in the Slave Properties window to make the slave module setting window appear.
Set modules in sequence through this setting window (See [Figure 10.2.10])
Slot
Module
Type
I Len.
O Len.
Content
1
Digital Output
QB
-
4
Digital output 4byte(MLE-TN32A)
2
Digital Input
IB
4
-
Digital input 4byte(MLE-DC32A)
3
Analog Input
IB
8
-
Analogue input 8byte(MLF-AD04A)
4
Analog Output
QB
-
8
Analogue output 8byte(MLF-DV04A)
5
Analog Output
QB
-
8
Analogue output 8byte(MLF-DC04A)
6
Analog Input
IB
8
-
Analogue input 8byte(MLF-RD04A)
7
Digital Output
QB
-
2
Digital output 2byte(MLE-RY16A)