Honeywell 2MLL-PMEC - Page 184

Appendix
A - 7 Pnet I/F Module 2MLL-PSRA, 2MLL-PMEA, 2MLL-PMEB User’s Guide R220
Honeywell January 2019
No.
Keyword
Type
Detail
Description
N00041
_P1B01S
N
Word
P2P parameter No.1, block
No.01 correspondent
station No.
P2P parameter No.1, block No.01’s correspondent
station No. saved
Use P2PSN command to modify during Run if
correspondent station number is used in
SoftMaster.
N00042
~
N00045
_P1B01R
D1
Device
structure
P2P parameter No.1, block
No.01 area device 1 to read
P2P parameter No.1, block No.01 device area 1 to
read saved
N00046
_P1B01R
S1
Word
P2P parameter No.1, block
No.01 area size 1 to read
P2P parameter No.1, block No.01 area size 1 to
read saved
N00047
~
N00050
_P1B01R
D2
Device
structure
P2P parameter No.1, block
No.01 area device 2 to read
P2P parameter No.1, block No.01 area device 1 to
read saved
N00051
_P1B01R
S2
Word
P2P parameter No.1, block
No.01 area size 2 to read
P2P parameter No.1, block No.01 area size 2 to
read saved
N00052
~
N00055
_P1B01R
D3
Device
structure
P2P parameter No.1, block
No.01 area device 3 to read
P2P parameter No.1, block No.01 area device 3 to
read saved
N00056
_P1B01R
S3
Word
P2P parameter No.1, block
No.01 area size 3 to read
P2P parameter No.1, block No.01 area size 3 to
read saved
N00057
~
N00060
_P1B01R
D4
Device
structure
P2P parameter No.1, block
No.01 area device 4 to read
P2P parameter No.1, block No.01 area device 4 to
read saved
N00061
_P1B01R
S4
Word
P2P parameter No.1, block
No.01 area size 4 to read
P2P parameter No.1, block No.01 area size 4 to
read saved
N00062
~
N00065
_P1B01W
D1
Device
structure
P2P parameter No.1, block
No.01 saved area device 1
P2P parameter No.1, block No.01 saved area
device 1 saved
N00066
_P1B01W
S1
Word
P2P parameter No.1, block
No.01 saved area size 1
P2P parameter No.1, block No.01 saved area size
1 saved
N00067
~
N00070
_P1B01W
D2
Device
structure
P2P parameter No.1, block
No.01 saved area device 2
P2P parameter No.1, block No.01 saved area
device 2 saved
N00071
_P1B01W
S2
Word
P2P parameter No.1, block
No.01 saved area size 2
P2P parameter No.1, block No.01 saved area size
2 saved
N00072
~
N00075
_P1B01W
D3
Device
structure
P2P parameter No.1, block
No.01 saved area device 3
P2P parameter No.1, block No.01 saved area
device 3 saved
N00076
_P1B01W
S3
Word
P2P parameter No.1, block
No.01 saved area size 3
P2P parameter No.1, block No.01 saved area size
3 saved
N00077
~
N00080
_P1B01W
D4
Device
structure
P2P parameter No.1, block
No.01 saved area device 4
P2P parameter No.1, block No.01 saved area
device 4 saved
N00081
_P1B01W
S4
Word
P2P parameter No.1, block
No.01 saved area size4
P2P parameter No.1, block No.01 saved area size
4 saved
[Table 3] List of communication devices based on P2P number (P2P No. : 1~8, P2P block : 0~63)
Remark
1) If P2P parameters are to be specified with SoftMaster used for N area, the setting will be performed
automatically. And its modification during Run is also available by P2P dedicated command.
2) Since the addresses of N area available are classified according to P2P parameter setting No. and block index
No., the area not used for P2P service can be used as an internal device.