Chapter 5 Communication Program
15 Pnet I/F Module 2MLL-PSRA, 2MLL-PMEA, 2MLL-PMEB User’s Guide R240
Honeywell January 2019
(7) Read
(a) Connect to CPU.
(b) After connected, select On-line and Read Parameter to display the screen as shown in [Figure.
5.2.16] and then, check the applicable parameters and click [OK].
[Figure 5.2.14] Read screen
(c) Reads previously specified values for the parameters checked.
(8) View Tree by Transmission/Reception
To Next Page
Loading...
