Chapter 7 N Configurator Setting
19 Pnet I/F Module 2MLL-PSRA, 2MLL-PMEA, 2MLL-PMEB User’s Guide R240
Honeywell January 2019
7.5.2 Upload Network Settings
(1) Communication connection settings
The method of connection settings can be referred from 7.5.1 Network Settings
downloading
(2) Network Settings uploading
Conduct uploading by selecting “Upload image” from “Communication” menu. At this time,
new project will be automatically generated, and uploading is proceeded.
[Figure 7.5.5] Upload status
If uploading is completed, “Done” message will be displayed on the output window.
Project topology will show the Network Configuration composition uploaded from current
master.
[Figure 7.5.6] Uploading completed
To Next Page
Loading...
