Need help?Do you have a question about the Honeywell 5010 and is the answer not in the manual?
General| Resolution | 5 mil |
|---|---|
| Interface | USB |
| Humidity | 5% to 95% (non-condensing) |
| Type | Handheld Barcode Scanner |
| Electrical Rating | 5V DC ±5% |
Details the available OEM Engine models, interfaces, and decoding capabilities.
Explains how to use Plug and Play bar codes for instant engine setup with common interfaces.
Covers USB HID and USB COM Port Emulation for connecting the imager to a PC.
Details Terminal IDs for supported devices and lists available terminals.
Covers RS-232 Baud Rate, Word Length, Receiver Time-Out, and Handshaking settings.
Details various trigger modes and presentation configurations for the imager.
Explains how to add, clear, and manage prefixes and suffixes for scanned data.
Details configuration for common symbologies like Codabar, Code 39, Code 128, UPC, and EAN.
Details the IMGSNP command for capturing images and its various modifiers.
Explains the IMGSHP command for transmitting captured images and its modifiers.
Configures OCR fonts, creates templates, and defines user variables for OCR reading.
Describes how to query device settings using serial commands.
Guides users through common troubleshooting steps for imager issues.
To Next Page