Need help?Do you have a question about the Honeywell 5180 and is the answer not in the manual?
General| Brand | Honeywell |
|---|---|
| Model | 5180 |
| Category | Barcode Reader |
| Language | English |
Details on CB Scheme, UL/c-UL recognized components, and safety standards.
Statement regarding LED testing and classification according to IEC 62471:2006.
Laser classification as Class 1 according to IEC 60825-1 standard.
Provides an overview of the 5X10/5X80 series and its integration into OEM devices.
Explains the purpose and content of the user's guide for installation and programming.
Steps to follow after opening the shipping carton to check contents and for damage.
Details three OEM Engine models and their compatibility with various interfaces.
Instructions and diagram for connecting the OEM Engine to a PC for evaluation.
Explains how Plug and Play bar codes configure engine setup for common interfaces.
Details programming the engine for RS-232 connection with specific baud rate and data format.
Instructions for programming the OEM Engine for IBM SurePos using Plug and Play codes.
How to change the pre-programmed interface of the image engine using Terminal ID.
Lists supported terminals with their corresponding Terminal IDs for PC configuration.
Options for setting the baud rate for RS-232 communication between imager and terminal.
Sets image size to VGA resolution (640x480) or standard (752x480).
Configures beeper behavior for good read indications, including volume and pitch.
Configures LED behavior for good read indications and polarity settings.
Sets the idle and active states of the beeper signal for sound output.
Explains how to add user-defined data strings before and after scanned bar code data.
Step-by-step guide on how to add prefixes or suffixes to scanned data.
Procedures for clearing single or all prefixes/suffixes for symbologies.
Settings to slow data transmission for improved data integrity.
Overview of using the Data Format Editor to modify the imager's output.
Steps to add a primary or alternate data format for scanned bar codes.
Options to enable or disable the Data Formatter for output control.
Allows scanning one bar code with a different data format than the primary.
Enables or disables decoding for all or specific bar code symbologies.
Configuration options for Codabar bar codes, including start/stop characters and check digits.
Configuration options for Code 39 bar codes, including start/stop characters and check digits.
Configuration options for Interleaved 2 of 5 bar codes, including check digits.
Captures an image using various modifiers for style, beeper, and exposure.
Transmits stored images using modifiers for filters, format, and rotation.
Captures specific image areas for signatures, reducing transfer time and file size.
Enables or disables OCR capability and selects OCR fonts like OCR-A, OCR-B, and MICR.
Guides on creating custom templates to define length and content of OCR strings.
Setup for verifying check characters in OCR applications using modulo 10 or 36.
Temporarily enables Code I.D. transmission before decoded symbology.
Displays current software revision, unit serial number, and product information.
Restores all programming options to factory default settings.
Software for configuring imaging devices, updating firmware, and creating bar codes.
Explains conventions used for menu and query command descriptions.
Details the syntax for menu commands including Prefix, Tag, SubTag, Data, and Storage.
Describes special characters used to query device settings and field usage.
Commands to activate and deactivate the imager using serial communication.
Information that repairs and upgrades must be performed by authorized service centers.
Guidelines for cleaning the imager's window to maintain reading performance.
Instructions to inspect cables and connectors for wear or damage.
Guide to diagnose and resolve common problems with power, reading, and data display.
Details on obtaining warranty or non-warranty service from Honeywell service centers.
Contact methods for technical support including Knowledge Base and Support Portal.
Honeywell's warranty policy, exclusions, and limitations for product defects.
Lists symbologies with their AIM ID, possible modifiers, and Honeywell Code ID (hex).
Table mapping ASCII characters to decimal, hexadecimal, and character codes.
Details code page standards for proper character display in bar code data.
To Next Page