Honeywell 5180

7 - 24
UPC-A Addenda Required
When Required is scanned, the imager will only read UPC-A bar codes that
have addenda. You must then turn on a 2 or 5 digit addenda listed on page 7-
23.
Default = Not Required.
UPC-A Addenda Separator
When this feature is on, there is a space between the data from the bar code and
the data from the addenda. When turned off, there is no space.
Default = On.
UPC-A/EAN-13 with Extended Coupon Code
Use the following codes to enable or disable UPC-A and EAN-13 with Extended
Coupon Code.
Default = On.
* Not Required
Required
Off
* On
On
* Off