Preface
Instruction manual 854 ATG Page 3
Preface
This manual is intended for technicians involved with the commissioning and service of the Honeywell Enraf
series 854 Advanced Technology Gauge.
A description preceding the technical procedures gives the technical information necessary to understand its
functioning. It is recommended to read this description prior to performing any of the procedures.
For mechanical and electrical installation of the 854 ATG, refer to the Installation guide 854 Advanced
Technology Gauge. This manual describes the commissioning, maintenance and trouble shooting of the basic
854 ATG level measurement. Other features such as: level alarm outputs, analog level output, temperature
measurement, pressure measurement, etc. are describes in separate manuals. For an overview, refer to the list
of related documents in Appendix F.
Legal aspects
The information in this manual is copyright property of Enraf B.V., Netherlands.
Enraf B.V. disclaims any responsibility for personal injury or damage to equipment caused by:
• Deviation from any of the prescribed procedures;
• Execution of activities that are not prescribed;
• Negligence of the general safety precautions for handling tools, use of electricity and microwave radiation.
EC
declaration
of
conformity
Refer
to
the
EC
declaration
of
conformity, shipped
with
the
instrument.
Additional information
Please do not hesitate to contact Honeywell Enraf or its representative if you require additional information.
To Next Page
Loading...
