Need help?Do you have a question about the Honeywell DVC100 (M) MK2 and is the answer not in the manual?
General| Brand | Honeywell |
|---|---|
| Model | DVC100 (M) MK2 |
| Category | Measuring Instruments |
| Language | English |
Lists critical safety precautions and compliance requirements for installation and operation in hazardous areas.
Highlights correct usage of the communication link entry socket and the approved handheld interrogator.
Provides general instructions and references for preparing and executing installation procedures.
Details considerations for physically mounting the unit, including location and impact resistance.
Outlines the procedure for fitting the unit and the Optima gas detector at the monitoring location.
Describes the steps to mount the unit with the Searchline Excel gas detector.
Explains how to mount the unit to the Cross-Duct plate and connect the detector.
Provides essential rules for wiring, earthing, and cable management for safe and correct operation.
Details the terminal connections and wire colours for connecting the Optima gas detector.
Specifies terminal connections and wire colours for the Cross-Duct detector installation.
Outlines terminal connections and wire colours for the Searchline Excel detector installation.
Displays the ATEX certification details, model, serial number, and safety warnings for the unit.
Illustrates the terminal connections for field wiring, sensors, and communication links within the unit.
Shows the overall system interconnection between hazardous and safe areas, including the termination unit and control equipment.
Details the product's inputs, outputs, power, environmental limits, physical dimensions, and certifications.
To Next Page