– 22 –
Chime Mode
Chime ModeChime Mode
Chime Mode
CHIME mode alerts you to the opening of a perimeter door or window while the
system is disarmed. When Chime mode is activated:
• Three tones sound at the keypad whenever a perimeter door or window is opened.
• Interior zones do not produce a tone when they are faulted.
• Pressing the READY key will display the open protection points.
• Chime mode can be used only while the system is disarmed.
To turn Chime Mode on/off
(system must be
disarmed)
:
+ 9
(Security Code) CHIME
The CHIME message appears when on. Perimeter
zones will cause a tone when faulted.
DISARMED CHIME
READY TO ARM
Fixed-Word Display: CHIME
The CHIME message disappears when Chime mode is off.
Voice Chime: You can set the Voice Keypads (if installed) to announce faulted
(opened) entry/exit or perimeter zones whenever normal Chime mode is on.
To turn Voice Chime Mode on or off: # + 0 + 2 + 4
(normal Chime mode must be on first)
When Voice Chime is on, faulted zones cause a voice status announcement, chime
and display. When off, the sounder still provides chime if normal Chime mode is on.
To Next Page
Loading...
