Honeywell ALERTON ACM-VLX - Appendix E: HyperTerminal Settings

Installation and Operations Guide
|
ACM-VLX/VLX/EXP/AXM
78
© Honeywell. All Rights Reserved. LT-VLXEXPAXMIOG Rev. 01
Appendix E: HyperTerminal settings
For HyperTerminal, default settings on the Settings tab should be appropriate. If
you have changed any settings, use the defaults shown.
Table 24 Basic HyperTe rminal s ettings for prope r conne ction to the VLX/
VLX-Pla tinum
Prope rty Se tting
Bits pe r s e cond 57,600
Data bits 8
Parity None
Stop bits 1
Flow control None
Figure 28 Se le ctions on the Se ttings tab of Hype rTerminal for conne ction to the
VLX/VLX-Platinum.