EasyManua.ls Logo

Honeywell Bendix/King KTA970 - FAILURE CONDITIONS

Honeywell Bendix/King KTA970
73 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
KTA 970/KMH 980 Pilot’s Guide
Rev 2 006-18273-0000
31
TCAS I Appendix
At the conclusion of a successful Self Test, a synthesized voice
announces:
“TCAS SYSTEM TEST OK”
FAILURE CONDITIONS:
Should a failure be detected during self test, the audio message says:
“TCAS SYSTEM TEST FAIL”
A “TCAS” flag will be annunciated on the traffic display. A self test fail-
ure may indicate that the auxiliary equipment required for TCAS I is not
operational. Check the associated equipment.
Should a display failure be detected at any time, the Display Fail flag will
appear on the KMD 550/850. A “Display Fail” flag is not caused by the
TCAS I processor.
RADIO ALTIMETER
If RALT is installed and is inoperative, TCAS I will be Inoperative.

Table of Contents

Related product manuals