Honeywell Braukmann D05 User Manual

X-XX UL
INSTALLATION INSTRUCTIONS
Copyright © 1996 Honeywell Inc. • All Rights Reserved
APPLICATION
The Honeywell Braukmann D05 Pressure Regulating
Valve is a high quality pressure regulating valve that
maintains a constant outlet pressure over a wide range
of inlet supply pressures. It is ideally suited for new
residential and light commercial construction, drip
irrigation, and applications requiring highly sensitive and
accurate regulation.
The wide inlet pressure range of the D05 gives flexibility
without compromising reduced outlet pressure accuracy
or capacity. The superior balanced single seat design
maintains a constant outlet pressure over a wide range
of inlet pressures. The noncorroding unitized cartridge
insert contains all the working parts and is easily
replaceable.
The D05 is used for water or air regulation. It is not
suitable for steam.
SPECIFICATIONS
Model:
D05 Pressure Regulating Valves
Construction Materials:
Body: Bronze.
Internal Parts: Stainless steel and engineered plastic.
Regulator Mechanism: Fabric-reinforced diaphragm.
Inlet Pressure:
400 psi maximum.
Reduced Pressure Range:
15 to 150 psi (1/2 in. to 1 in.).
15 to 130 psi (1-1/4 in.).
Outlet Pressure:
Factory set at 60 psi.
Differential:
14 psi minimum (inlet to outlet).
Reduced Ratio:
10:1 maximum.
D05
Pressure Regulating Valves
62-3028-4
Fluid Temperature (Maximum):
Air: 158°F (70°C).
Water: 180°F (82°C).
Ambient Temperature:
33°F to 140°F (1°C to 60°C)
Pipe Sizes:
1/2 in., 3/4 in., 1 in., and 1-1/4 in. available.
Connections:
Can be configured as female thread-by-thread, single-
or double-union, NPT threaded or sweat.
Strainer Screen Size:
0.032 in. (0.8 mm)
Gauge Tap:
1/4 in. NPT (available on all models).
Approvals:
ASSE (Std. 1003) Certified.
IAPMO, CSA, and City of L.A. Listed.
Dimensions:
See Fig. 1.
Water Capacities (See Table 1):
The suitability of a given regulator size is dependent
on the pressure requirements of each installation.
To determine the pressure regulator valve size
required for a specific installation, determine the
following:
1. Pressure differential between inlet and outlet
pressure in pounds per square inch (psi),
2. Capacity in gallons per minute (gpm), and
3. Allowable reduced pressure falloff in psi.
Given these variables, use Table 1 to determine the
proper size pressure regulator valve for your application.
Example: An installation has 135 psi inlet pressure, 60 psi
outlet pressure (75 psi pressure differential). If
12 gpm capacity is required with only 10 psi
falloff allowable, a 1/2 in. D05 is required.

Honeywell Braukmann D05 Specifications

General

Brand	Honeywell
Model	Braukmann D05
Category	Control Unit
Language	English

Summary

Application

Specifications

Water Capacities

Details the suitability of regulator size based on pressure requirements, capacity, and falloff.

Installation Instructions

Installation

General guidelines and procedural steps for installing the D05 pressure regulating valve.

Changing the Outlet Pressure

Procedure to adjust the valve outlet pressure using the adjusting bolt and locknut.

Replacing the Cartridge

Cleaning the Cartridge Screen

Instructions for cleaning the D05 valve's cartridge screen and related components.

Operation

Troubleshooting

D05 Parts and Accessories

List of replacement parts, union kits, accessories, and pressure gauges for the D05 valve.

Pressure Gauges

Details on available pressure gauges compatible with the D05 valve for monitoring.