Need help?Do you have a question about the Honeywell BA295 Compact and is the answer not in the manual?
General| Model | BA295 Compact |
|---|---|
| Category | Control Unit |
| Manufacturer | Honeywell |
| Power Supply | 24 VDC |
| Operating Voltage | 24 VDC |
| Enclosure Rating | IP20 |
| Output Current | 2 A |
| Communication Protocol | Modbus RTU |
| Current Consumption | 100 mA |
| Humidity Range | 5-95% RH (non-condensing) |
| Input Channels | 8 |
| Output Channels | 4 |
Relieve pressure in the medium pressure zone using the relief valve.
Reclose the venting valve on the differential pressure measuring equipment.
Procedure for testing the function of the inlet check valve.
Open the shutoff valves to continue the test.
Close ball valves 1 and 2 to complete the testing step.
Close the shutoff valves before removing the check valve.
Briefly vent the appliance via ball valves.
Open the shutoff valves after the check valve replacement.
To Next Page