Function Buttons
Speed / On - Off
COOL
OFF ON
SWING
OFF ON
SPEED
0
3
2
1
Connect to the power supply and turn the Speed knob. The fan
will start. Change the speed from 1 for Low to 2 for Medium to
3 High. To switch OFF the unit turn the Speed know to "0".
SPEED
Press the 'SPEED' button and to the speed from High to Low.
COOL
To begin cooling the desired area turn the "COOL" switch ON.
The water pump will operate. You can feel the cooler air after
the Honeycomb media is completely wet.
SWING
Turn the "SWING" switch ON. The louvers will begin to move
from right to left automatically. Manually adjust the horizontal
louvers to change vertical airflow.
Horizontal Louvers
Manually adjust the horizontal louvers to change vertical
airflow.
USE & OPERATION
10
To Next Page
Loading...
Need help?
General
