Honeywell CM4 - Page 48

43 Rev. 2.4 (3/05)
Honeywell Analytics CM4 Protocol Manual
Save Current This command saves a backup copy of the
Conguration current conguration to nonvolatile memory in the
0x62 CM4 monitor. This conguration can be restored
using the Restore Conguration command.
Command packet to instrument:
Command Code (0x62) - 1 byte
Response packet from instrument:
Command Code (0x62) - 1 byte
CM4 Date - 2 bytes
CM4 Time - 2 bytes
Status - 1 byte
0x00 = Conguration saved
0xff = Error
Restore This command restores a conguration that was
Conguration previously saved to nonvolatile memory in the
0x63 CM4 monitor.
Command packet to instrument:
Command Code (0x63) - 1 byte
Response packet from instrument:
Command Code (0x63) - 1 byte
CM4 Date - 2 bytes
CM4 Time - 2 bytes
Status - 1 byte
0x00 = Conguration restored
0xff = Error, conguration
unchanged