74- 3450- 2
S7760A COMMAND DISPLAY
FOR RAPIDZONE SOLUTION
GENERAL
The command display shows system variables and alarms.
You can also modify setpoints, schedules, basic system
parameters and acknowledge alarms at the display. Easy
navigation between building, zone and diagnostic views allow
you to quickly tailor the RapidZone system for comfort and
energy savings.
The system must first be configured using the RapidZone
Software package. The RapidZone software is designed pri-
marily for your HVAC contractor to configure and monitor your
rooftop unit (RTU) and zone controllers. For more information
refer to the RapidZone Application Guide 74-3449 and the
S7760A Command Display User Guide 74-2974.
The command display is an easy way to make changes to the
schedules and other configuration options after the Rapid-
Zone application is downloaded.
Room temperature, setpoints, occupancy schedules, equip-
ment alarms, current date and password access are some
data screens that you are able to work with when using the
RapidZone command display.
Back
Select
M18305A
SUNDAY 12:00:00 AM
60.3 DFOutdoor Temp
To View Zone or Rooftop Data
Press the Building Vw Button—>
!!
Silence
Alarms
Setting
BuildingVw
Honeywell RapidZone
To Next Page
Need help?
General